Pocket Balance Weight Digital Jewelry Scale 0.01g x 200g  With Retail box

1.Place scale on the horizontal flat surface,press [ON/OFF]key to turn on the scale.

2. Wait until “0.0” is displayed.

3.Put the object(s) on the weighing platform.

4.Using the [UNITS] key. you ccan swith between the weighing units.

5.Using the [LIGHT]key, you can turn on or off the backlight.

1.Turn on scale as described above.

2.Place the “tare item” on the platform.

3.Press[TARE] and wait until “0.0”is displayed.

4.Add the “net-weight-item”.

1.Turn on the scale and wait until the LCD displays “0.0”.

2.Place a sample amount (25pcs,50pcs,75pcs or 100pcs) of the quantity you wish to weigh and count onto the platform.

3.Press and HOLD [PCS]key for 2 seconds;the LCD will display a random number , for example “100”.

4.Press[UNITS]key to select the sample amount of the item that you have put onto the platform.

5.Press[PCS]key to confirm the above information, the LCD will now display pos in the corner to show that the scale is in counting mode.

6.Remove the sample quantity from the platform.

7.You nowcan place any amount of your item(s) on the scale and LCD will display a count.

8.You can switch between weighing mode and counting mode by pressing [UNITS] or [PCS] key respectively.

1.Reset the scale by pressing [ON/OFF]key.

2.Wait until the LCD displays “0.0” and then press and HOLD [UNITS]key for 3 seconds. the LCD will display “CAL”,and then release the [UNITS]key.

3.Press [UNITS] key again, the LCD will display “CAL”,follow by the return to normal weighing mode.

5.Put away the calibralion weight and press [ON/OFF] to turn off the soale and the calibration is finished!

Calibration:Auto calibration

Tare range:Tare full capacity

Auto off: 30seconds off

Operation temp:50-86 degrees Fahrenheit

Power:2*AAA Batteries(not includes)

1 x Digital scale
1 x English user manual